Victron energy VE.Net DC Manuel d'utilisateur télécharger pdf (Page 9)

Battery Capacity

240Ah

Step 5.) Press “Enter” to start changing this parameter. 200Ah will blink. Use “▼” and “▲” to

change it to the capacity of the connected battery bank.

Step 6.) Press “Enter” to confirm the value. The value will stop blinking and it is saved in the

memory of the battery controller.

Step 7.) Repeat step 4 and 5 for other setup parameters. Press “▼” to scroll down to the next

parameter. Please refer to chapter 5 of this manual for an explanation of all the setup parameters.

To learn more about the VE.Net Panel refer to the manual included with the VE.Net Panel.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Victron energy VE.Net DC Manuel d'utilisateur Page 9